中文
English
Español
Français
{{i.title_en}}
Home
> New Energy> Solar Energy> Solar Hybrid Inverter Charger > HF48V-H Higher PV Voltage Series HF4835U60-H
HF48V-H Higher PV Voltage Series HF4835U60-H
MOQ: 10 PCS
Note: If you have any questions,please contact us
- 1.Max.Voc：500V；Rated input voltage：110/120V
- 2.Load friendly: Stable sine wave AC output via SPWM modulation
- 3.Supports a wide range of battery technology: GEL, AGM, Flooded, LFP, and program.
- 4.Dual LFP battery activation method: PV&mains
- 5.Working without battery under special conditions.
- HF4835U60-H
- HF4850U80-H
SRNE Solar Co.,Ltd
Since:
2009
Product Description
Product characteristics
.png)
.png)
Parameters
| Model | HF4835U60-H | HF4850U80-H | Adjustable |
| Battery Input | |||
| Battery type | Sealed、FLood、GEL、LFP、Ternary | √ | |
| Rated Battery Input Voltage | 48V ( Minimum Startup Voltage 44V) | ||
Hybrid Charging Maxi mum Charging Current | 80A |
√ | |
| Battery Voltage Range | 40Vdc~60Vdc ± 0.6Vdc(Under-voltage Warning/Shutdown Voltage/Over-voltage Warning/Over-voltage Recovery...) |
√ | |
Maximum PV Open-circuit Voltage |
450vdc |
500vdc | |
| PV Working Voltage Range | 120-450Vdc | 120-500Vdc | |
| MPPT Voltage Range | 120-430Vdc | 120-450Vdc | |
| Maximum PV Input Current | 18A | ||
| Maximum PV Input Power | 4400W | 5200W | |
| Maximum PV Charging Current | 60A | 80A | √ |
Mains Maximum Charging Current |
40A | √ | |
| Rated Input Voltage | 110/120Vac | ||
| Input Voltage Range | (90Vac~140Vac)±2% | √ | |
| Frequency | 50Hz/ 60Hz (Automatic Detection) | ||
| Mains Charging Efficiency | >95% | ||
| Switch Time (bypass and inverter) | 10ms(Typical Value) | ||
| Maximum Bypass Overload Current | 40A | 63A | |
| AC Output | |||
| Output Voltage Waveform | Pure Sine Wave | ||
| Rated Output Voltage (Vac) | 120Vac (100/105/110Vac) | √ | |
| Rated Output Power (VA) | 3500 (2900/3050/3200) | 5000 (4100/4300/4500) | |
| Rated Output Power(W) | 3500 (2900/3050/3200) | 5000 (4100/4300/4500) | |
| Peak Power | 7000VA | 10000VA | |
| On-load Motor Capacity | 2HP | 4HP | |
| Output Frequency Range(Hz) | 50Hz土0.3Hz/60Hz±0.3Hz | √ | |
| Maximum Efficiency | >90% | ||
| No-load Loss | Non Energy-saving Mode: ≤50W Energy-saving Mode：≤25W (Manual Setup） | ||
| General | |||
| Certificate | CE(IEC62109-1)/CETL(UL 1741 CSA C22.2 NO.107.1) | ||
| EMC Certification Level | EN61000 | ||
| Working Temperature Range | -15°C ~ 55°C | ||
| Storage Temperature Range | -25°C ~ 60°C | ||
| Humidity Range | 5% to 95%(Conformal Coating Protection) | ||
| Dimensions | 426mm*322mm*126mm | ||
| Weight (KG) | 10.9 | 11.6 | |
Product introduction:
·Load friendly: Stable sine wave AC output via SPWM modulation
·Supports a wide range of battery technology: GEL, AGM, Flooded, LFP, and program.
·Dual LFP battery activation method: PV&mains
·Uninterrupted power supply: simultaneous connection to utility grid/generator and PV
·Intelligent programming: the priority of the output from different energy sources can be set
·High energy efficiency: up to 99.9% MPPT capture efficiency
·Instant viewing of operation: the LCD panel displays data and settings ,while you can also be viewed using the app and webpage
·Power saving: power saving mode automatically reduces power consumption at zero-load
·Efficient heat dissipation: via intelligent adjustable speed fans
·Multiple safety protection functions: short circuit protection, overload protection, reverse polarity protection, and so on.
·Working without battery under special conditions.
