Automobile Emergency Starting Power Supply

Automobile emergency starting power supply is a multifunctional portable mobile power supply developed for car lovers and business people. Its characteristic function is to start the car when the car is out of power or cannot be started for other reasons. At the same time, it combines the functions of inflation pump with emergency power supply and outdoor lighting. It is one of the necessary products for outdoor travel.

The design concept of automobile emergency starting power supply is easy to operate and carry, and can deal with all kinds of emergencies at the same time. At present, there are mainly two kinds of automobile emergency starting power supply on the market, one is lead-acid battery and the other is lithium polymer.

The automobile emergency starting power supply of lead-acid battery is more traditional. It adopts maintenance free lead-acid battery, which has large mass and volume, and the corresponding battery capacity and starting current will also be relatively large. Such products are generally equipped with inflation pumps, and also have functions such as overcurrent, overload, overcharge and reverse connection indication protection, which can charge all kinds of electronic products. Some products also have functions such as inverters.

Lithium polymer automotive emergency starting power supply is relatively fashionable. It is a recent product with light weight and small volume, which can be mastered by one hand. Such products are generally not equipped with inflation pump, with overcharge off function, and the lighting function is relatively powerful, which can supply power for all kinds of electronic products. The lamps of this kind of products generally have the function of explosion flash or SOS remote led rescue signal lamp, which is more practical.

1. The vehicle emergency starting power supply can ignite all vehicles output by 12V batteries, but the applicable product range of vehicles with different displacement will be different, and can provide field emergency rescue and other services;

2. Standard led super bright white light, flashing warning light and SOS signal light are good helpers for travel;

3. Automobile emergency start power supply not only supports automobile emergency start, but also supports a variety of outputs, including 5V output (supporting all kinds of mobile phones and other mobile products), 12V output (supporting routers and other products), 19v output (supporting most notebook computer products), which increases the wide application of life;

4. The automobile emergency starting power supply has built-in maintenance free lead-acid battery and high-performance polymer lithium-ion battery, which has a wide range of options;

5. The emergency starting power supply for lithium ion polymer vehicles has a long service life, with more than 500 charge discharge cycles, and the vehicle can be started 20 times when fully charged (the power display is 5 grid) (the author uses this model, which does not represent all brands);

6. The lead-acid battery emergency starting power supply is equipped with an inflation pump with a pressure of 120psi (picture), which can be easily inflated.

7. Special note: the power display of lithium ion polymer emergency start power supply needs to be more than 3 grids to ignite the vehicle, so as not to burn the main engine of vehicle emergency start power supply. Just remember to charge.

1. Pull up the manual brake, put the clutch in neutral, and check the starter switch, which should be in off gear.

2. Please place the emergency starter on a stable ground or non mobile platform, away from the engine and belt.

3. Connect the "emergency starter" red positive clip (+) to the positive pole of the battery that is out of power. And make sure the connection is secure.

4. Connect the black auxiliary clamp (-) of "emergency starter" to the grounding column of the vehicle and ensure that the connection is firm.

5. Check the correctness and firmness of the connection.

6. Start the car (no more than 5 seconds). If the start fails at one time, please wait more than 5 seconds.

7. After success, remove the negative clamp from the grounding column.

8. Remove the red positive clip of "emergency starter from the positive pole of the battery.

9. Please charge the battery after use.