

Hogar > Sistema hidráulico> Motor Motor hidráulico> Motores orbitales hidráulicos > Danfoss bm2 OMR series 2 Bolt mounting flange, G1 / 2 NPT Port Hydraulic Motor Replacement

1 / 9

Danfoss bm2 OMR series 2 Bolt mounting flange, G1 / 2 NPT Port Hydraulic Motor Replacement

Puntaje

Vendido:100 Preguntas y respuestas 0

MOQ: 100 PC

Notas: Si tiene alguna pregunta, por favor póngase en contacto con nosotros.

Xingtai feiyue Hydraulic parts factory

Desde:

1985

Puedes hacer eso.

replacement for Danfoss BMR/OMR series Hydraulic Motor

1.Double needle bearing can bear higher radial force,with more Concentricity that can help smooth running under the high speed condition;

2.Shaft seal can bear high pressure of back and the motot can be used in parallel or in series;

3.High quality oil seal lead to longer service life;

4.Special design in the driver-linker and prolong operating life;

5.Special design for distribution system can meet the requirement of low noise of unit;

6. Shaft diameter 25mm; parallel key 8mm ;G1/4 Drain Port Thread ; 82.5mm Mounting Flange;

7.Hydraulic applications :Construction Machinery , Agriculture Machinery ,Heavy-Duty Equipment ,Forestry Machinery ,Mining Equipment.

BMR Main Specification

TYPE		BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2	BM2
TYPE		OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR	OMR
Displacement(ml/r)		50	63	80	100	125	160	200	250	315	400	500
Flow (LPM)	Continuous	40	40	60	60	60	60	60	60	60	60	60
Flow (LPM)	Intermittent	50	50	75	75	75	75	75	75	75	75	75
Speed (RPM)	Continuous	755	630	750	600	475	375	300	240	190	160	110
Speed (RPM)	Intermittent	970	790	940	750	600	470	375	300	240	200	128
Pressure (MPA)	Continuous	14	14	17.5	17.5	17.5	16.5	13	11	8.5	8.5	8
Pressure (MPA)	Intermittent	17.5	17.5	20	20	20	20	17.5	14	11.5	11.5	9
Torque (N*.m)	Continuous	100	124	190	240	292	363	358	352	360	420	464
Torque (N*.m)	Intermittent	126	156	220	280	340	430	448	470	470	548	580
1. Continuous pressure:Max.value of operating motor continuously.
2.Intermittent pressure:Max.value of operating motor in 6 seconds per minute .
3.Peak pressure:Max.value of operating motor in 0.6 second per minute.
4.The optimum operating situation should be at the 1/3-2/3 of the continuous operating situation.

Replace DANFOSS No

Replace Eaton/Char-Lynn

112-1066	112-1096	112-1090	112-1060	112-1163	112-1145	112-1107	112-1068
112-1067	112-1097	112-1091	112-1061	112-1063	112-1069	112-1099	112-1062

Replace M+S Hydraulic