{{i.title_en}}
PWM Solar Charge And Discharge Controller HC2410
MOQ: 20 PCS
Note: If you have any questions,please contact us
- 1. Large-screen LCD, adjustable charging, and discharging parameters.
- 2. Complete multi-stage PWM charge management.
- 3. Built-in reverse connection protection, open circuit protection, high-temperature protection, over current/short circuit protection
- 4. Double MOSFET to use in the circuit for prevent power backflow, with ultra-low heating.
- 5. Support Li-ion battery activation.
- HC2410
- HC2420
- HC2430
![SRNE Solar Co.,Ltd](https://fenghao.obs.cn-east-3.myhuaweicloud.com/6brZFoidblRlD6qR42R9KXCdyHT6Ll.jpg?x-image-process=image/resize,lfit,w_132,h_84,limit_0)
SRNE Solar Co.,Ltd
Since:
2009
Product Description
![PWM Solar Charge And Discharge Controller HC2410/HC2420/HC2430](/upload/editor/images/image(85).png)
Parameters
Model | HC2410 | HC2420 | HC2430 | |
System voltage | 12V/24V | |||
Battery operating voltage range | 0.06~0.36W | |||
Rated current | Charge | 10A | 20A | 30A |
Load | 10A | 20A | 30A | |
Maximum PV input voltage | 120W/12V 240W/24V | 240W/12V 480W/24V | 360W/12V 720W/24V | |
Maximum PV input voltage | 50V, enable protection and stop charging. Below 45V, charge resumes. | |||
Charging mode | The default is PWM charging,b04/b07 can be set to intermittent charging. | |||
USB output | 5V/2A | |||
Static power consumption | ≤10mA | |||
Operating temperature | -35~+60℃ | |||
Altitude | ≤3000M | |||
IP rating | IP32 | |||
Product size | 120*75*34mm | 134*85*36mm | 159*100*39mm | |
Installation size | 108.5*58.5mm | 121*70mm | 147*80mm | |
Weight | 130g | 180g | 290g |
Performance characteristics:
• 32-bit high-speed main control chip.
• Large-screen LCD, adjustable charging, and discharging parameters.
• Complete multi-stage PWM charge management.
• Built-in reverse connection protection, open circuit protection, high-temperature protection, over current/short circuit protection (which can be set), are self-recovery types, that do not damage the controller
• Double MOSFET to use in the circuit for prevent power backflow, with ultra-low heating.
• Support Li-ion battery activation.
• 2 USB ports, maximum current up to 2A, supporting charging of mobile electronics devices.